全自动多条长棒加热热剪炉(简称全自动多棒热剪炉)。采用了先进的热风循环加热方式,液压热剪切等多项新技术,具有加热速度快、生产组织灵活、成品率高、自动化程度高、操作环境优越、能耗低等特点。
性能特点: 炉子保温性能好、棒温均匀、热效率高、耗能低。初始加温时间为2.5-4小时可达到铝棒挤压温度。 设备燃料可采用:天然气、水煤气、轻柴油等。控制方式 PCL , 触摸屏,分为全自动控制、半自动控制、手动控制三种形式,并设有炉温超温警报装置。
Automatic MULT-Hot Shearing Product Line:Using hot air circulation heating mode of advanced technology, new hydraulic thermal shear etc, the heating speed is fast, the production organization is flexible, high rate of finished products, high degree of automation, operation environment is superior, energy consumption.
Performance characteristics:Good thermal insulation properties , uniform temperature , high thermal efficiency, low energy consumption. The initial heating time is 2.5-4 hours can reach the aluminum bar extrusion temperature. The device can be used as the fuel: natural gas, water gas, light diesel oil. Control mode : PCL, touch screen, divided intoautomatic control, semi automatic control and manual control in three forms, and is provided with a furnace temperature and over temperature alarm device.
主要技术参数 Main technical parameters
全自动多棒热剪炉 Full automatic multi billets heater | |
设备型号 Model No. | NG-BL(80-406) |
铝棒直径 Diameter of Aluminum Bar | Φ80~Φ406mm |
铝棒长度 Length of Aluminum Bar | 5000~8000m |
加热燃料 Heating Fuel | 轻柴油、液化汽油、天然气、发生炉煤气、城市煤气、煤炭 Light diesel、liquefied gas、natural gas, generator gas, city gas, coal |
剪棒长度 Shearing Length | 300mm~800mm,长度可调至与挤压机配套 Can be adjusted to fit the extrusion press |
剪棒长度精度 Shearing accuracy | ±3mm |
连续生产耗能 Energy consumption for continuous production | 正常生产按产能或按一天平均每吨约25-35方左右 In the case of regular production, the energy consumption is about 25-35m3per ton (base on production capacity or per day) |
温差 Temperature difference | ±5℃ |
总功率 Total power | Approx.14.6kw |
压缩空气消耗量 Compressed air consumption | |
冷却水流量 Cooling water flow rate |
全自动多支长棒热剪炉
Full automatic multi billets heater
全自动多条长棒加热热剪炉(简称全自动多棒热剪炉)。采用了先进的热风循环加热方式,液压热剪切等多项新技术
关键词:
联系我们
Contact
地点:佛山市南海区狮山镇狮山科技工业园北园国狮路南工机械
邮编:528225
电话:0757-89961978
手机:13703075431
传真:0757-89961977
邮箱:fsnhng@126.com or awc117@outlook.com
0757-89961978
扫描二维码分享到微信